VALUE PACK Oricom UHF380 5W UHF Radio + Antenna

  • NOW $284.95 AUD
  • Save $9.11 AUD

Oricom 5 Watt UHF CB Radio including Antenna and Bracket.

UHF380 Radio - Key Features

  • 80 Channels*
  • Heavy duty controller speaker mic
  • Wide band scanner (400-512MHz)
  • 5 watt (max TX power)
  • 200 user programmable receive only channels
  • 5 digit Selcall ID with alpha display
  • 38 CTCSS and 104 DCS
  • Duplex (range extender)
  • Open/Instant/Priority Scan
  • Large, easy to read display
  • 5 Year Warranty on UHF380

ANU200  Antenna - Key Features

  • Pre-tuned to UHF CB Frequency
  • Ground independent
  • Fiberglass whip
  • Elevated feed with heavy duty spring
  • Antenna length: 950mm
  • Includes 3.8m RG58 coax cable , pre-terminated FME connector and PL259 connector

BR100 "Z" antenna bracket for boot or bonnet mount.

*This 80 channel narrowband radio has a total of 75 useable voice channels Channels 22 and 23 are used for Telemetry and Telecommand, voice communications are not allowed on these channels.
Channels 61,62 and 63 are guard channels and are not available for use.


Tech Specs
Compliance AS/NZS 4365:2011
Frequency Range TX 476.425 - 477.4125 MHz
Frequency Range RX 400 - 512MHz
Number of TX/RX Channels 80 UHF CB
Number of user programmable RX only Channels 200
Channel Spacing TX/RX 12.5KHz
Wide Band Scanner 400~512, 400~420, 420~450, 450~470, 470~512 MHz
Operating modes Simplex, Repeater TX offset (+750kHz)
Selcall ID 5 Digit with alpha display
Scanning Speed 130 msec per channel
Antenna Impedance 50 Ohms
Operating Volts nominal 13.8 VDC
Operating Volts Range 10 to 15 VDC
Over Voltage Protection Diode and voltage regulator
Over Current Protection 2 Amp fuse
Reverse Polarity Protection Shunt diode
Frequency Stability +/- 5ppm

RF Output Power Nominal 5watts
Modulation F3E (FM)
Maximum Deviation 2.5kHz
Spurious Emissions < -30 dBm
TX Audio pre-emphasis + 6dB/octave from 300Hz to 3kHz
Current Consumption during TX 1.6 Amps with 50 Ohm antenna termination

Circuit Type Dual conversion superheterodyne
IF Frequencies 1st IF = 21.4MHz , 2nd IF = 450kHz
Current Consumption during RX 200mA
Sensitivity < -123dBm at 12dB SINAD
Sensitivity Receive only channels < -110dBm for 12dB SINAD
Selectivity +/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB
Intermodulation Immunity > 70dB
Spurious Immunity > 70dB
Audio Output Power 3 Watts Maximum
RX Audio de-emphasis -6dB/octave 300Hz to 3kHz
Audio frequency response 300Hz to 3kHz
External speaker jacks One on transceiver one on head unit for optional 8 Ohm mono speaker (3.5mm jack.)

Dimensions 135 (d) x 110 (w) x 29 (h) mm
Weight 420g


We Also Recommend